华强中天logo
搅拌罐选型分站
热门产品

搅拌罐
邮箱:hqzt1997@163.com  
电话:13263146544
地址:北京市东城区广渠门外名敦道

当前位置:主页 > 常见问题 >

不锈钢搅拌罐的产品简要说明

发布时间:2019-02-21 浏览次数:


 

配液罐

  配液罐设计合理,工艺先进,完全符合国家GMP认证要求。罐体均采用立式双层结构,内胆抛光精度RaO.45。内筒体缠绕螺旋带加热,并充填聚氨酯材料保温。

  The design of the liquid dispensing tank is reasonable and the technology is advanced, which fully meets the requirements of the national GMP certification.The tank body adopts vertical double-layer structure with polishing accuracy of RaO.45. The inner cylinder is heated by spiral tape winding and filled with polyurethane material for thermal insulation.

  外部采用镜面板或磨砂板保温,罐体光泽一致。凡接触药液部件均采用316L材质,其余均采用304材质。内罐底部封头为凹凸型,卫生级配液罐生产厂家,采用偏壁式轴向流搅拌,罐体顶部设进水口、回流口、消毒口、清洗球、入孔填料口、呼吸口安装0.22um空气呼吸器、搅拌系统。

  The exterior is insulated by mirror panel or grinding plate, and the gloss of the tank body is the same. All the parts contacted with liquid medicine are made of 316L material, and the rest are made of 304 material. The bottom head of the inner tank is concave and convex, and the manufacturers of sanitary grade batching tank adopt biased wall axial flow stirring. The top of the tank is provided with water inlet, reflux outlet, disinfection outlet, cleaning ball, hole filling outlet and breathing outlet to install 0.22um air respirator and mixing system.

  罐体底部设凝水口、出料口、排污口、取样口、温度探头、液位传感器。配有控制柜操作,仪表显示药液温度、液位,提供上、下限报警功能。根据用户要求,稀配罐可增加充氮气装置和PH计。

  The bottom of the tank body is provided with condensate outlet, discharge outlet, sewage outlet, sampling port, temperature probe and liquid level sensor. Equipped with control cabinet operation, the instrument shows the temperature and level of liquid medicine, and provides upper and lower alarm functions. According to user's requirement, dilute tank can be added with nitrogen filling device and PH meter.

 

上一篇:华强中天介绍一下全自动搅拌系统简介!

下一篇:不锈钢搅拌罐采用电加热器进行间接换热

相关资讯